The A3G500-BM06-H1 from EBM Papst is a powerful EC axial fan from the EG series, designed for demanding industrial ventilation applications. With an airflow of up to 5,195 m³/h and an EC motor with active PFC and an integrated PID controller, it delivers high performance with intelligent control. Thanks to HyBlade technology, it combines low noise with long service life and high efficiency.
The fan is perfectly suited for installation in duct systems and units where reliable, energy-efficient 24/7 operation is required. RS-485 MODBUS-RTU communication makes it easy to integrate into modern control systems.
- Airflow: 5,195 m³/h at 1,260 rpm
- Voltage: 230 V AC (200–277 V AC), 50/60 Hz
- Power: 500 W with active PFC and soft start
- Protection class: IP55
- RS-485 MODBUS-RTU and integrated PID controller
- 5-blade HyBlade impeller, Ø 500 mm
- Thermal overload protection (TOP), ball bearings, continuous operation (S1)
- Weight: 5.7 kg – connection via terminal box
At Reserv, EBM Papst products are stocked by an established wholesaler, ensuring quick delivery of original spare parts. You can shop with confidence, knowing that you always receive genuine components with a full quality guarantee. See the datasheet on the product page for complete technical information.
Technical specifications
Datasheet (PDF) - download| Product attribute | Value |
|---|---|
| Airflow at 0 Pa | 5195 m³/h |
| Speed | 1260 rpm |
| Power | 500W |
| Frequency | 50/60 Hz |
| Voltage | 230V AC VAC |
| Motor frame | The fan is mounted with the shaft horizontally or with the rotor downwards as the standard mounting position; mounting with the rotor upwards is possible on request. Condensate drainage holes are located on the rotor side. Mounting screws are allowed to protrude a maximum of 16 mm. The unit weighs 5.7 kg and is intended for installation in duct systems or air handling units. |
| Casing | Die-cast aluminum electronics enclosure, black-painted; PP plastic junction box |
| Impeller | The fan impeller has 5 sickle-shaped blades of S-series type, made from pressed sheet metal (blank) coated with PP plastic. The rotor surface is painted black. The airflow direction is marked V (from the motor towards the rotor). The direction of rotation is counter-clockwise when viewed towards the rotor. The fan impeller's diameter is 500 mm. |
| Bearing type | ball bearing |
| IP class | IP55 |
| Motor protection | Thermal overload protection (TOP), internally connected |
| Motor code | M3G084-GF |
| Rotation direction | counterclockwise, viewed facing the rotor |
| Motor type | The motor is an EC motor (electronically commutated) of type M3G084-GF with a rated voltage of 230 V AC (range 200–277 V AC) and a frequency of 50/60 Hz. It is single-phase and has a power consumption of 500 W at nominal operating conditions. The insulation class is F, and the motor is equipped with a thermally operated protector (TOP) that is internally connected. The motor has active PFC, an integrated PID controller, soft start, and RS-485 MODBUS-RTU communication. The operating mode is S1 (continuous duty), and the motor electronics are housed in a black-painted, cast aluminum casing. |
Similar products
