The A3G710-AU23-03 from EBM Papst is a powerful EC axial fan in the large-scale class, designed for integration into units and duct systems. With an airflow of up to 16,200 m³/h and a robust three-phase EC motor, it delivers impressive performance with high efficiency. The fan is ideally suited for demanding ventilation and air conditioning applications in industry and buildings.
Thanks to the integrated M3G150-IF EC motor with RS-485 MODBUS-RTU communication and built-in PI controller, the fan is easy to integrate into modern control systems. The HyBlade technology provides low noise levels and a long service life.
- Airflow: 16,200 m³/h
- Voltage: 400 V AC (380–480 V AC), 50/60 Hz
- Power: 3,700 W, rated current 5.6 A
- Rotational speed: 1,360 rpm
- Protection class: IP55
- HyBlade fan impeller, Ø 710 mm with 5 blades
- Housing in cast aluminum, painted gray
- Soft start, PFC and reverse polarity protection
At Reserv, you will find original parts from EBM Papst with fast delivery and reliable availability through well-stocked wholesale warehouses. See the datasheet on the product page for complete technical information.
Technical specifications
Datasheet (PDF) - download| Product attribute | Value |
|---|---|
| Airflow at 0 Pa | 16,200 m³/h |
| Speed | 1360 rpm |
| Power | 3700W |
| Frequency | 50/60 Hz |
| Voltage | 400V AC VAC |
| Motor frame | The fan is designed as a panel fan intended for installation in an air handling unit or duct. The standard mounting position is shaft horizontal or rotor downwards; rotor upwards is possible upon request. Condensate drainage holes are located on the rotor side. The total weight of the fan is 23.86 kg, and connection is made via a terminal box with cable entry for cable diameters 4–10 mm. |
| Casing | cast aluminum, painted gray |
| Impeller | The fan impeller is of HyBlade type with sickle-shaped blades (S series) and has a diameter of 710 mm. It consists of 5 blades made of sheet aluminum with a PP plastic coating applied by injection molding, and the rotor surface is painted black. The blade angle is 0° and the airflow direction is V (axial). At the optimal efficiency point, the fan impeller delivers an airflow of 16,200 m³/h at a static pressure increase of 336 Pa. |
| Bearing type | ball bearing |
| IP class | IP55 |
| Motor protection | Thermal overload protection for electronics/motor, reverse polarity protection, and locked rotor protection |
| Motor code | M3G150-IF |
| Rotation direction | clockwise, looking towards the rotor |
| Motor type | The motor is of type M3G150-IF and is a three-phase EC motor with a rated voltage of 400 V AC (range 380–480 V AC) and a frequency of 50/60 Hz. Power consumption is 3700 W at the rated speed of 1360 rpm and the rated current is 5.6 A. The motor has insulation class F and environmental protection class H2. It is equipped with passive power factor correction (PFC), soft start, integrated PI controller, RS-485 MODBUS-RTU communication, and configurable inputs and outputs (I/O). |
Similar products
