The A3G910-AS35-03 from EBM Papst is a powerful EC axial fan in a panel design with dimensions of 910 × 910 × 290 mm. It is powered by an electronically commutated M3G150-FF motor for three-phase operation and delivers up to 18,445 m³/h – an excellent choice for demanding ventilation applications. Thanks to HyBlade technology with sickle-shaped aluminum blades, high efficiency is combined with low noise levels.
The fan is ideal for industrial ventilation, air handling units, and cooling systems where robust construction and smart motor control are crucial. The integrated soft start, PI controller, and MODBUS RTU communication via RS-485 make it easy to integrate into modern control systems.
- EC motor M3G150-FF, 1,700 W, 400 V AC (380–480 V), 50/60 Hz
- Airflow up to 18,445 m³/h at 800 rpm
- HyBlade impeller with 5 sickle-shaped aluminum blades, PP-coated
- Protection class IP55 – withstands demanding environments
- Ball bearings and insulation class F, operating mode S1
- Integrated soft start, PI controller, and MODBUS RTU (RS-485)
- Housing in cast aluminum, painted grey
- Sound pressure level 70 dB(A)
At Reserv, EBM Papst products are stocked by our wholesaler, ensuring quick delivery of original parts. Order with confidence and get the right component directly for your project. See the datasheet on the product page for complete technical information.
Technical specifications
Datasheet (PDF) - download| Product attribute | Value |
|---|---|
| Airflow at 0 Pa | 18,445 m³/h |
| Speed | 800 rpm |
| Power | 1700 W |
| Frequency | 50/60 Hz |
| Voltage | 400V AC VAC |
| Motor frame | The fan is designed as a panel-mounted axial fan with a size of 910 mm. The mounting position is with the shaft horizontal or with the rotor facing downwards; mounting with the rotor facing upwards can be ordered on request. Condensate drainage holes are located on the rotor side. The maximum allowed screw play is 20 mm, and the tightening torque for the connection cable is 4 ± 0.6 Nm. |
| Casing | Die-cast aluminum, painted grey |
| Impeller | The fan impeller is of the HyBlade type with sickle-shaped blades from the S-series. It has 5 blades made of sheet aluminum with PP plastic coating and the rotor surface is painted black. The blade pitch is 0° and the airflow direction is V (axial). Under nominal operating conditions, the fan impeller delivers up to 27905 m³/h at free air flow and 800 rpm. |
| Bearing type | ball bearing |
| IP class | IP55 |
| Motor protection | Overload protection for electronics/motor, reverse polarity protection, and locked rotor protection |
| Motor code | M3G150-FF |
| Rotation direction | clockwise, looking towards the rotor |
| Motor type | The motor is an EC (electronically commutated) motor, type M3G150-FF, for three-phase operation (3~) with a nominal voltage of 400 V AC (range 380–480 V AC) and a frequency of 50/60 Hz. The rated power is 1700 W at 800 rpm and the rated current is 2.7 A. The motor is equipped with ball bearings and insulation class F, as well as operating mode S1. It has integrated soft start, PI controller, MODBUS RTU via RS-485, configurable inputs/outputs, and thermal overload protection for electronics and motor. |
Similar products
