The 8300100041 from EBM Papst is a powerful EC centrifugal fan with backward-curved blades, built for industrial and commercial ventilation applications that require high performance and energy-efficient operation. With an impressive airflow of 10,500 m³/h and a robust size of 577×577×352 mm, it delivers stable and efficient air circulation. The fan is powered by an EC motor connected to 400 VAC and can handle demanding environments thanks to its IP55 protection class.
The fan is ideal for large ventilation units, industrial processes, and climate control systems where reliability and energy savings are a priority.
- EC motor for high energy efficiency
- Backward-curved blades for quiet and smooth operation
- Airflow: 10,500 m³/h
- Supply voltage: 400 VAC
- Dimensions: 577×577×352 mm
- IP55 protection class – protected against dust and water jets
At Reserv, you will find original parts from EBM Papst with fast delivery directly from well-stocked wholesale warehouses. You can be confident that you will receive the correct component – certified and quality-assured. See the datasheet on the product page for complete technical information.
Technical specifications
Datasheet (PDF) - download| Product attribute | Value |
|---|---|
| Airflow at 0 Pa | 11,910 m³/h |
| Speed | 2080 rpm |
| Power | 4250 W |
| Frequency | 50/60 Hz |
| Voltage | 400V AC VAC |
| Motor frame | The fan is of the RadiPac type and is designed for direct mounting without a separate stand. The standard mounting position is shaft horizontal or rotor down; rotor up is possible on request. Condensate drain holes are located on the rotor side. The inlet ring accessory (article number 8217102237) with a pressure tap (k-factor: 381) is not included in the delivery but can be ordered separately. The maximum screw length for mounting is 20 mm. |
| Casing | cast aluminum, electronics enclosure housing |
| Impeller | The impeller is a backward-curved single-inlet wheel with 5 blades, made of PP plastic. The rotor surface is painted black. The impeller has a size of 560 mm and is designed for RadiPac centrifugal fan applications. At the nominal operating point (optimal efficiency point), the wheel delivers 11910 m³/h at 871 Pa static pressure increase with a total efficiency of 71.9%. |
| Bearing type | ball bearing |
| IP class | IP55 |
| Motor protection | Electronic motor protection |
| Motor code | E15031-85 |
| Rotation direction | clockwise, viewed facing the rotor |
| Motor type | The motor is an EC (electronically commutated) motor, type E15031-85, three-phase and designed for 400 V AC with a voltage range of 380–480 V AC. It has a power consumption of 4250 W and a rated current of 6.4 A at 2080 rpm. The motor is equipped with an integrated PID controller, soft start, motor current limitation, and thermal overload protection for the electronics and motor. Communication is via RS-485 MODBUS-RTU, and the control interface is SELV-potential-safe isolated from the mains. Insulation class F and operating mode S1. |
Similar products
