The R3G160-AZ07-03 from EBM-Papst is a compact EC centrifugal fan with forward-curved blades, designed for efficient and controlled ventilation. Measuring 160×160×101 mm and offering an airflow of up to 525 m³/h, it delivers impressive performance in a small form factor. The EC motor, designated M3G055-DF, ensures energy-efficient operation at 230 V AC and 50/60 Hz.
This fan is ideal for applications where controllability and operational reliability are crucial – for example, in air handling units, refrigeration equipment, and industrial ventilation. Control via 0–10 V DC or PWM makes it easy to integrate into modern control systems.
- Airflow: 525 m³/h
- Speed: 2,400 rpm
- Power: 170 W at 230 V AC
- EC motor with soft start and electronic motor protection
- Control via 0–10 V DC or PWM signal
- IP54 protection – resistant to dust and splashing water
- Fan impeller in galvanized sheet steel, 160 mm
- Mounting in any position, CE marked
At Reserv, you will find original EBM-Papst parts stocked by our wholesaler. This means fast delivery and reliable access to the right component – without compromise. See the datasheet on the product page for complete technical information.
Technical specifications
Datasheet (PDF) - download| Product attribute | Value |
|---|---|
| Airflow at 0 Pa | 525 m³/h |
| Speed | 2400 rpm |
| Power | 170W |
| Frequency | 50/60 Hz |
| Voltage | 230V AC VAC |
| Motor frame | The fan is designed for mounting in any position. Fastening screws can have a maximum play of 10 mm and 5 mm respectively, depending on the mounting point. The unit weighs 1.66 kg and is approved according to standards EN60335-1 and EN60335-2-31, and carries the CE mark. |
| Impeller | The fan wheel is made of galvanized sheet steel and has a size of 160 mm. It is an open rotor design without a condensate drain hole. The direction of rotation is clockwise when looking at the rotor. The fan wheel is suitable for centrifugal fan applications and can be complemented with an accessory inlet ring (item no. 09588-2-4013), which is not included in the delivery. |
| Bearing type | ball bearing |
| IP class | IP54 |
| Motor protection | Electronic motor protection |
| Motor code | M3G055-DF |
| Rotation direction | clockwise, viewed from the rotor |
| Motor type | The motor is of EC type (electronically commutated) with the designation M3G055-DF and is designed for single-phase operation at 230 V AC and 50/60 Hz. It has electronic motor protection with thermal overload protection for electronics and motor, soft start, and current and voltage limitation. The motor is equipped with ball bearings and has insulation class B. The rotor surface is thick-film passivated, and the protection class is IP54. Control is via 0–10 V DC or PWM signal with an SELV interface that is safely separated from the mains. |
Similar products
