The A2D300-AP08-16 from EBM-Papst is a robust AC axial fan with dimensions of 300×300×101 mm. It is powered by an M2D074-DF three-phase motor and delivers an impressive airflow of 2,080 m³/h – a powerful choice for demanding ventilation applications. The fan is excellently suited for industrial units, air handling systems, and heat recovery where continuous and reliable operation is required.
The motor is rated for 40,000 hours of continuous operation (S1), making the A2D300-AP08-16 a long-term choice for installations with high demands on operational reliability.
- Airflow: 2,080 m³/h at 2,500 rpm
- Voltage: 230 V (delta) / 400 V (star), 50/60 Hz
- Power: 225 W, rated current 0.64 A
- Protection class IP44
- Ball bearing with lifetime lubrication – 40,000 h operating time
- Thermal overload protection (TOP) against overheating
- 5-blade sheet metal fan impeller with black painted surface
- Insulation class F, environmental protection class H1+
At Reserv, EBM-Papst components are stocked by our wholesaler so that you can quickly obtain the original part you need. You can be sure that you always receive a genuine product with a full quality guarantee. See the datasheet on the product page for complete technical information.
Technical specifications
Datasheet (PDF) - download| Product attribute | Value |
|---|---|
| Airflow at 0 Pa | 2080 m³/h |
| Speed | 2500 rpm |
| Power | 225W |
| Frequency | 50/60 Hz |
| Voltage | 230/400 V AC VAC |
| Motor frame | The unit is a 300 mm built-in component and weighs 3.2 kg. Mounting screws of strength class 8.8 shall be used and secured against accidental loosening. The fan shall be mounted without mechanical stress against the surface, and vibrations from the installation should be isolated, for example with compensators. |
| Casing | Rotor with black-lacquered surface, black-lacquered sheet metal blades |
| Impeller | The fan impeller has 5 blades made of sheet metal with a black-painted surface. The airflow direction is axial (V-direction). The direction of rotation is counter-clockwise when viewed towards the rotor. The fan impeller is designed for a maximum of one million load cycles under cyclic speed loads. |
| Bearing type | ball bearing |
| IP class | IP44 |
| Motor protection | Thermal overload protection (TOP) with basic insulation |
| Motor code | M2D074-DF |
| Rotation direction | counterclockwise, viewed facing the rotor |
| Motor type | The motor is of type M2D074-DF and is a three-phase motor designed for operation at 230 V (delta) or 400 V (star) at 50 or 60 Hz. It has insulation class F and environmental protection class H1+. The motor bearing consists of ball bearings with lifetime lubrication, rated for 40,000 hours of operation. The motor is equipped with a thermal overload protector (TOP) with basic insulation to prevent overheating. The operating mode is S1 (continuous operation). |
Similar products
