The A3G350-AN01-01 from EBM Papst is a powerful EC axial fan in a 350 mm panel format, designed for energy-efficient and reliable ventilation. The fan is powered by an electronically commutated EC motor (M3G074-CF) at 230 V AC and delivers an impressive airflow of up to 2,400 m³/h. Thanks to HyBlade technology with sickle-shaped blades, high efficiency is combined with a low noise level of 59 dB(A).
The fan is perfectly suited for demanding ventilation applications such as air handling units, heat recovery, and industrial cooling. The optional mounting position makes installation flexible and easy.
- Airflow: 2,400 m³/h at 1,475 rpm
- Voltage: 230 V AC, 50/60 Hz
- Power consumption: 165 W, rated current 1.35 A
- Protection class: IP54
- HyBlade impeller with 5 pressed-in sheet metal blades, Ø 350 mm
- Electronic motor protection with soft start and overvoltage detection
- Ball bearings for long operational reliability
- CE marked and EAC approved
At Reserv, you will find original parts from EBM Papst stocked by our wholesaler — you get the right part quickly and can rely on the quality. See the datasheet on the product page for complete technical information.
Technical specifications
Datasheet (PDF) - download| Product attribute | Value |
|---|---|
| Airflow at 0 Pa | 2400 m³/h |
| Speed | 1475 rpm |
| Power | 165W |
| Frequency | 50/60 Hz |
| Voltage | 230V AC VAC |
| Motor frame | The fan is an axial panel fan designed for integration into a panel or frame. The mounting position is optional, allowing for flexible installation in various orientations. Screw clearance allows for a maximum of 10 mm and 5 mm play, respectively, depending on the mounting point. The fan weighs 2 kg and complies with standard EN60335-1 with CE marking and EAC approval. |
| Casing | 350 mm panel fan, axial |
| Impeller | The fan impeller is of the HyBlade type with sickle-shaped blades (S-series) and has 5 press-fit sheet metal blades spray-coated with PP plastic. The airflow direction is marked 'V' and the direction of rotation is counter-clockwise when looking at the rotor. The impeller has an open rotor design without condensate drainage holes. The fan impeller has a diameter of 350 mm and is optimized for high efficiency with an overall efficiency of 39.9%. |
| Bearing type | ball bearing |
| IP class | IP54 |
| Motor protection | Electronic motor protection |
| Motor code | M3G074-CF |
| Rotation direction | counterclockwise, viewed facing the rotor |
| Motor type | The motor is an EC motor (electronically commutated) of type M3G074-CF with single-phase 230 V AC operation and a frequency range of 50/60 Hz. It has a power consumption of 165 W and a rated current of 1.35 A at a nominal speed of 1475 rpm. The motor is equipped with electronic motor protection, soft start, power limiter, current limit control, as well as overvoltage and undervoltage detection. The insulation class is 'B' and the operating mode is S1. The motor can withstand a maximum ambient temperature of +60 °C during operation and up to +80 °C during transport/storage. |
Similar products
