The A3G630-AS25-03 from EBM Papst is a powerful industrial-sized EC axial fan, equipped with HyBlade technology and an integrated EC motor, type M3G150-FF. The fan delivers an impressive airflow of 14,070 m³/h and is perfectly suited for demanding ventilation and air handling applications. The housing is made of cast aluminum and its IP55 protection class makes it suitable for harsh environments.
The fan is aimed at OEM manufacturers and installers in industry, building technology, and air handling, where high capacity and operational reliability are crucial requirements.
- Airflow: 14,070 m³/h at 281 Pa
- EC motor M3G150-FF, 400 V AC (380–480 V), 3000 W, 4.6 A
- HyBlade impeller with 5 sickle-shaped aluminum blades, Ø 630 mm
- Protection class IP55 and insulation class F
- Integrated soft start, motor current limitation, and locked rotor protection
- Ball bearings for long service life and continuous operation (S1)
- Sound pressure level 73 dB(A)
- CE marked and approved according to EAC and UL
At Reserv, you will find original parts from EBM Papst, stocked by our wholesaler for fast delivery. You can rest assured that you will receive the correct component — every time. See the datasheet on the product page for complete technical information.
Technical specifications
Datasheet (PDF) - download| Product attribute | Value |
|---|---|
| Airflow at 0 Pa | 14,070 m³/h |
| Speed | 1450 rpm |
| Power | 3000W |
| Frequency | 50/60 Hz |
| Voltage | 400V AC VAC |
| Motor frame | The fan is designed as a panel fan intended for system integration. The mounting position is with the shaft horizontal or the rotor downwards; rotor upwards is available on request. Condensate drain holes are located on the rotor side. Electrical connection is made via a terminal box with screw terminals, and cables with a diameter of 4–10 mm can be connected with a tightening torque of 4 ± 0.6 Nm. The fan weighs 20.2 kg and is CE-marked and approved according to EAC and UL. |
| Casing | cast aluminum, painted gray |
| Impeller | The fan impeller is a HyBlade type with sickle-shaped blades from the S-series, totaling 5 blades. The blades are made of aluminum sheet with casting, coated with PP plastic by injection molding. The rotor's surface is painted black and the blade angle is 0°. The airflow direction is V (axial) and the impeller has a diameter of 630 mm. At optimal efficiency, the fan achieves an airflow of 14,070 m³/h at a pressure buildup of 281 Pa. |
| Bearing type | ball bearing |
| IP class | IP55 |
| Motor protection | Overload protection for electronics/motor, reverse polarity protection, and locked rotor protection |
| Motor code | M3G150-FF |
| Rotation direction | clockwise, looking towards the rotor |
| Motor type | The motor is an EC motor, type M3G150-FF, three-phase and rated for 400 V AC (range 380–480 V AC) at 50/60 Hz. Power consumption is 3000 W at nominal load and the rated current is 4.6 A. The motor has insulation class F and environmental protection class H2. It is equipped with integrated soft start, motor current limitation, thermal overload protection, and undervoltage and phase failure detection. Operation is in continuous duty mode S1 with ball bearings for long service life. |
Similar products
