The D3G160-HA04-02 from EBM-Papst is a powerful EC centrifugal fan with a forward-curved impeller and double inlet. It delivers an impressive airflow of 2,190 m³/h and is suitable for demanding ventilation and air handling applications. The casing is made of galvanized sheet steel with a flange for easy mounting.
The fan is well-suited for air handling units, industrial ventilation, and process equipment where high capacity and energy-efficient EC technology are important. The integrated PID controller and RS-485 MODBUS-RTU communication make it easy to integrate into modern control systems.
- EC motor M3G084-DF, 230 V AC, 50/60 Hz
- Airflow: 2,190 m³/h at free flow
- Power: 750 W, rated current 3.3 A at 2,500 rpm
- Protection class IP54 – resistant to moisture and dust
- Active PFC, soft start and integrated PID controller
- Control signal 0–10 V DC or PWM and RS-485 MODBUS-RTU
- Ball bearings for long and reliable service life
- Thermal overload protection, operating mode S1
At Reserv, you will find original EBM-Papst products, stocked by wholesaler for quick delivery. You can be confident that you will get the right part for the right application. See the datasheet on the product page for complete technical information.
Technical specifications
Datasheet (PDF) - download| Product attribute | Value |
|---|---|
| Airflow at 0 Pa | 2190 m³/h |
| Speed | 2500 rpm |
| Power | 750W |
| Frequency | 50/60 Hz |
| Voltage | 230V AC VAC |
| Motor frame | The motor is mounted on brackets for unilateral vibration damping. The fan is supplied with a housing with a flange for easy attachment. The installation position is with the shaft horizontal or the impeller downwards; mounting with the impeller upwards can be ordered. Condensate drainage holes are on the impeller side. |
| Casing | sheet, galvanized, flanged |
| Impeller | The fan impeller is forward-curved with dual-intake and has a size of 160 mm. It is made of galvanized steel and has a black painted rotor surface. The impeller rotates counter-clockwise when viewed from the rotor side. At free airflow (0 Pa), the fan impeller delivers up to 2190 m³/h. |
| Bearing type | ball bearing |
| IP class | IP54 |
| Motor protection | Thermal overload protection (TOP), internally connected |
| Motor code | M3G084-DF |
| Rotation direction | counter-clockwise, looking at the rotor |
| Motor type | The motor is of type M3G084-DF and is an EC motor (electronically commutated) for single-phase mains, 230 V AC, 50/60 Hz. It has a power consumption of 750 W and a rated current of 3.3 A at a nominal speed of 2500 rpm. The motor is equipped with active PFC, soft start, integrated PID controller, and RS-485 MODBUS-RTU communication. The protection class is IP54, insulation class F, and operating mode S1. The motor has thermal overload protection and supports a 0–10 V DC or PWM control signal. |
Similar products
