The R3G160-AZ09-16 from EBM-Papst is a compact EC centrifugal fan with forward-curved blades, designed for demanding ventilation and air handling applications. With an airflow of 510 m³/h and a 165 W EC motor, it delivers high performance with low energy consumption. The casing is made of galvanized steel, and the IP54 protection class makes it suitable for tougher environments.
The fan is ideal for air handling units, heat pumps, and industrial ventilation where energy efficiency and operational reliability are important requirements. Its flexible mounting position and built-in control interface with 0–10 V DC/PWM input make integration simple.
- Airflow: 510 m³/h at 2,450 rpm
- Voltage: 230 V AC, 50/60 Hz
- EC motor M3G055-DF with electronic motor protection
- Control interface: 0–10 V DC / PWM with SELV separation
- Soft start, power limiter, and overvoltage protection built-in
- Hybrid bearings for long service life
- Protection class IP54 – resistant to dust and splashing water
- Optional mounting position
At Reserv, you will find original parts from EBM-Papst with fast delivery. We stock a wide range through our wholesaler so you can quickly get the right fan in place – without compromising on quality.
Technical specifications
Datasheet (PDF) - download| Product attribute | Value |
|---|---|
| Airflow at 0 Pa | 510 m³/h |
| Speed | 2450 rpm |
| Power | 165W |
| Frequency | 50/60 Hz |
| Voltage | 230V AC VAC |
| Motor frame | The fan is designed for any mounting position. Mounting screws allow a maximum clearance of 5 mm and 10 mm respectively, depending on the mounting point. An inlet ring (accessory part 09588-2-4013) is available but not included in the standard delivery. The fan is of centrifugal type and suitable for installation in various directions thanks to its flexible mounting solution. |
| Casing | steel, galvanized sheet metal |
| Impeller | The fan impeller is of the backward-curved type with single inlet and has a size of 160 mm. It is made of galvanized sheet steel. The rotor surface is thick-film passivated for increased corrosion resistance. The fan impeller is an open rotor design without condensate drainage holes. |
| Bearing type | hybrid bearing |
| IP class | IP54 |
| Motor protection | Electronic motor protection |
| Motor code | M3G055-DF |
| Rotation direction | counterclockwise, viewed facing the rotor |
| Motor type | The motor is an EC motor, type M3G055-DF, with a nominal voltage of 230 V AC (200–240 V) and a power consumption of 165 W. It is equipped with electronic motor protection and thermal overload protection for the electronics and motor. The motor has an IP54 enclosure rating and insulation class B. It is equipped with soft start, power limiter, current limit restriction, overvoltage and undervoltage detection, and a control interface with 0–10 V DC/PWM input with SELV potential safely separated from the mains. |
Similar products
