The S3G500-BK07-G1 from EBM-Papst is a powerful EC axial fan with a protective grille, designed for demanding ventilation applications where high performance and robust construction are crucial. The fan delivers an impressive 3,820 m³/h airflow and is driven by an electronically commutated EC motor with an integrated PID controller and active PFC for optimal energy efficiency.
Thanks to HyBlade technology, low noise levels are combined with high efficiency. The fan is ideal for industrial ventilation systems, air handling units, and heat recovery systems where reliable operation under harsh conditions is required.
- Airflow: 3,820 m³/h at 74 Pa back pressure
- Voltage: 230 V AC, 50/60 Hz
- Power: 250 W, speed 970 rpm
- Protection class IP55 – resistant to moisture and dust
- Support for RS-485 MODBUS-RTU and analog 0–10 V DC/PWM control
- Soft start, power limiter, and thermal overload protection (TOP)
- Protective grille in steel-coated black plastic (RAL 9005), 500 mm
- Approved according to CE, UL, CSA, and EAC
At Reserv, you will find original EBM-Papst parts with fast delivery. We stock a wide range through our wholesale partners, ensuring you get the right fan without unnecessary delay. See the data sheet on the product page for complete technical information.
Technical specifications
Datasheet (PDF) - download| Product attribute | Value |
|---|---|
| Airflow at 0 Pa | 3820 m³/h |
| Speed | 970 rpm |
| Power | 250W |
| Frequency | 50/60 Hz |
| Voltage | 230V AC VAC |
| Motor frame | The fan is supplied with a protection guard for short nozzle, made of steel coated with black plastic (RAL 9005). The size is 500 mm. Condensate drainage holes are located on the rotor side. The standard installation position is shaft horizontal or rotor downward, with rotor upward as an option upon request. The fan complies with EN 61800-5-1 and CE standards, and is approved according to CSA, EAC, and UL. |
| Casing | Electronics enclosure material of die-cast aluminum, black lacquered; terminal box material of PP plastic |
| Impeller | The fan impeller has 5 sickle-shaped blades of S-series type, made of pressed sheet steel and spray-coated with PP plastic. The rotor surface is black-painted. The airflow direction is marked V and rotation is counter-clockwise when viewed towards the rotor. Under nominal operating conditions, the fan impeller provides an airflow of approximately 3820 m³/h at a back pressure of 74 Pa. |
| Bearing type | ball bearing |
| IP class | IP55 |
| Motor protection | Thermal overload protector (TOP), internally connected |
| Motor code | M3G084-DF |
| Rotation direction | counterclockwise, viewed facing the rotor |
| Motor type | The motor is an EC (electronically commutated) motor, size 84, designed for single-phase operation at 230 V AC and 50/60 Hz. It has insulation class F and environmental protection class H2. The motor is equipped with an integrated PID controller, power limiter, motor current limitation, active PFC, and soft start. A thermal overload protector (TOP) is internally connected and protects against overheating. The motor supports RS-485 MODBUS-RTU communication and analog control input 0–10 V DC/PWM. |
Similar products
