The S4E400-AP02-30 from EBM-Papst is a robust axial fan with a protective grille, designed for industrial ventilation and air treatment. The fan is powered by a single-phase AC motor (M4E074-EI) at 230 V and is suitable for both 50 and 60 Hz. With a black painted steel casing and IP44 protection class, it is built for demanding environments.
Thanks to the fan impeller's sickle-shaped blades (S-series) and an airflow of up to 2,695 m³/h, the product is an obvious choice for air handling units, heat recovery, and ventilation systems where high capacity and reliability are crucial.
- Airflow: 2,695 m³/h at optimal operating mode (50 Hz)
- Voltage: 230 V AC, 50/60 Hz
- Power: 160 W (50 Hz) / 240 W (60 Hz)
- Speed: 1,430 rpm (50 Hz) / 1,700 rpm (60 Hz)
- Protection class: IP44
- Bearing type: Ball bearings for long service life
- Thermal overload protection (TOP), internally wired
- Sound pressure level: 68 dB(A)
At Reserv, we stock original EBM-Papst parts and can deliver quickly. You can always be sure that you get the right component – approved for continuous operation and certified according to CE and UKCA. See the data sheet on the product page for complete technical information.
Technical specifications
Datasheet (PDF) - download| Product attribute | Value |
|---|---|
| Airflow at 0 Pa | 2695 m³/h |
| Speed | 1430/1700 rpm |
| Power | 160/240 W |
| Frequency | 50/60 Hz |
| Voltage | 230V AC VAC |
| Motor frame | The fan is delivered with a steel protection guard coated with black plastic (RAL 9005) for short nozzles. The standard mounting position is shaft horizontal or rotor downwards; rotor upwards is possible on request. Condensation drainage holes are located on the rotor side. The fan weighs 5.95 kg and has a size of 400 mm. |
| Casing | steel, black lacquered |
| Impeller | The fan impeller belongs to the S-series with sickle-shaped blades, designed for single inlet. It has a total of 5 blades made of sheet steel, black painted. The airflow direction is V (away from the motor). At the optimal efficiency point (50 Hz), the fan delivers an airflow of 2695 m³/h at a static pressure of 96 Pa. The rotor surface is black painted for corrosion protection. |
| Bearing type | ball bearing |
| IP class | IP44 |
| Motor protection | thermal overload protector (TOP), internally connected |
| Motor code | M4E074-EI |
| Rotation direction | counterclockwise, viewed facing the rotor |
| Motor type | The motor is a single-phase AC motor, type M4E074-EI, designed for operation at 230 V and 50/60 Hz. At 50 Hz, the nominal speed is 1430 rpm and power consumption is 160 W, while at 60 Hz it is 1700 rpm and 240 W. The motor is equipped with internally connected thermal overload protection (TOP) and ball bearings for long service life. The insulation class is 'B' and the motor protection rating is IP44, depending on installation and position. The motor is approved for continuous operation (S1) and complies with CE and UKCA standards. |
Similar products
