The W3G350-CN01-32 from EBM Papst is an EC axial fan with a wall ring, designed for demanding ventilation applications where energy efficiency and reliability are crucial. The fan is powered by 230 V AC and delivers an airflow of 2405 m³/h at the nominal operating point. Thanks to the electronically commutated EC motor M3G074-CF, power consumption is kept down to 165 W.
The fan is ideal for industrial and building ventilation, air handling units, and heat recovery systems where robust construction and flexible installation are required.
- Airflow: 2405 m³/h at 90 Pa static pressure
- Power: 165 W, rated current 1.35 A at 1475 rpm
- Voltage: 230 V AC, 50/60 Hz
- HyBlade impeller with 5 sickle-shaped blades – low noise level (59 dB(A))
- Protection class IP54 – resistant to moisture and dust
- Electronic motor protection with soft start, overvoltage and thermal protection
- Ball bearings and insulation class B for long service life
- Optional mounting position – square panel construction 460×460 mm
Reserv stocks EBM Papst products through established wholesalers and always delivers original parts. With us, you'll quickly find the right fan – without compromising on quality. See the datasheet on the product page for complete technical information.
Technical specifications
Datasheet (PDF) - download| Product attribute | Value |
|---|---|
| Airflow at 0 Pa | 2405 m³/h |
| Speed | 1475 rpm |
| Power | 165W |
| Frequency | 50/60 Hz |
| Voltage | 230V AC VAC |
| Motor frame | The fan is designed as a panel fan with a casing made of galvanized steel sheet coated with black plastic (RAL9005) in size 350 mm. The protective grille is made of steel coated with black plastic (RAL9005). The mounting position is optional, and the fan weighs 5.16 kg. There are no condensation drain holes; the rotor is an open type with cooling openings on the rotor side. |
| Casing | sheet, galvanized and coated with black plastic (RAL9005), square panel construction with protective grille |
| Impeller | The fan impeller is an axial HyBlade impeller with 5 sickle-shaped S-series type blades. The blades are made of pressed sheet metal without surface treatment and spray-coated with PP plastic. The airflow direction is marked as V (exhaust air from the rotor side), and the direction of rotation is counter-clockwise when viewed from the rotor. At the nominal operating point, the fan impeller delivers an airflow of 2405 m³/h at a static pressure increase of 90 Pa. |
| Bearing type | ball bearing |
| IP class | IP54 |
| Motor protection | Electronic motor protection |
| Motor code | M3G074-CF |
| Rotation direction | counterclockwise, viewed facing the rotor |
| Motor type | The motor is an EC motor (electronically commutated) of type M3G074-CF with single-phase supply 230 V AC (200–240 V) at 50/60 Hz. It has a power consumption of 165 W and a rated current of 1.35 A at a nominal speed of 1475 rpm. The motor is equipped with ball bearings and insulation class B, with operating mode S1 and electronic motor protection. It offers features such as soft start, power limiter, current limiting, overvoltage protection, and thermistor protection for electronics and motor. |
Similar products
