The W3G800-DS26-35 from EBM Papst is a powerful EC axial fan with a wall ring, designed for large-scale industrial ventilation. With an impressive airflow of 18,650 m³/h and a robust EC motor of type M3G150-FF, it delivers high performance with intelligent control. The fan is perfectly suited for demanding installations where energy efficiency, operational reliability, and flexible control are crucial.
Thanks to an integrated PID controller, MODBUS RTU via RS-485, and a configurable I/O interface, the W3G800-DS26-35 is an excellent choice for modern ventilation systems, industrial processes, and large air handling units.
- Airflow: 18,650 m³/h at 1000 rpm
- Voltage: 400 V AC (380–480 V), 50/60 Hz
- Power: 2200 W, rated current 3.4 A
- HyBlade fan impeller with 5 sickle-shaped blades made of sheet aluminum
- IP55 protection class and ball bearings for long service life
- Integrated soft start, PFC, and motor protection against overload and locked rotor
- Housing made of galvanized sheet metal with black plastic coating (RAL9005)
- Sound pressure level: 72 dB(A)
At Reserv, you will find original parts from EBM Papst, stocked by our wholesaler for fast delivery. You can shop safely and easily — we ensure that you get the right part for your application. See the datasheet on the product page for complete technical information.
Technical specifications
Datasheet (PDF) - download| Product attribute | Value |
|---|---|
| Airflow at 0 Pa | 18,650 m³/h |
| Speed | 1000 rpm |
| Power | 2200 W |
| Frequency | 50/60 Hz |
| Voltage | 400V AC VAC |
| Motor frame | The fan is supplied as a complete panel fan with a mounting guard and a housing made of galvanized sheet steel coated with black plastic (RAL9005). The support ring is made of steel coated with black plastic (RAL9005). The fan is designed for panel mounting and weighs 38.5 kg. The standard mounting position is shaft horizontal or rotor upwards; rotor downwards can be ordered upon request. |
| Casing | Sheet steel, galvanized and plastic-coated in black (RAL9005), round |
| Impeller | The impeller is of HyBlade type with sickle-shaped blades (S-series) and has 5 blades. The blades are made of sheet aluminum with a PP plastic coating and are painted black. The blade pitch is 0° and the airflow direction is A (axial). At a nominal speed of 1000 rpm, an airflow of 18,650 m³/h is achieved at the optimal efficiency point. |
| Bearing type | ball bearing |
| IP class | IP55 |
| Motor protection | Thermal overload protection for electronics/motor, reverse polarity protection and locked rotor protection |
| Motor code | M3G150-FF |
| Rotation direction | counter-clockwise, looking at the rotor |
| Motor type | The motor is an EC (electronically commutated) motor, type M3G150-FF, three-phase and designed for 400 V AC (380–480 V). The power consumption is 2200 W at nominal load and the current consumption is 3.4 A. The motor is equipped with integrated PFC (passive), soft start, integrated PID controller, MODBUS RTU via RS-485, and a configurable I/O interface. Insulation class F and operating mode S1 apply, and the motor is equipped with thermal overload protection for both electronics and the motor. |
Similar products
